See also ada requirements for seats grab bars in toilet stall requirements.
Ada toilet stall grab bars.
Side wall the side wall grab bar shall be 42 inches 1065 mm long minimum located 12 inches 305 mm maximum from the rear wall and extending 54 inches 1370 mm minimum from the rear wall.
A grab bar at least 36 inches 965 mm long shall be located behind the water closet with one end no farther than 6 inches 150 mm from the inside corner of the stall.
The ada standards require horizontal grab bars on the rear wall and side wall of the water closet but it does not specify a vertical grab bar.
The function of grab bars is to give the restroom user additional support when getting onto and off of a toilet.
The ada standards do not require this grab bar but allow a second grab bar to be within the 12 clearance above the horizontal grab bar 609 3 if there is a separation of 1 min.
Grab bars are required in accessible toilet rooms.
Side wall the side wall grab bar shall be 42 inches 1065 mm long minimum located 12 inches 305 mm maximum from the rear wall and extending 54 inches 1370 mm minimum from the rear wall.
The icc a117 1 standard for accessible and usable buildings and facilities which is referenced by the international building code requires an 18 min.
Grab bars in toilet stall requirements.
Vertical grab bar at water closets.
Ada grab bars grab bars provide additional support when using a restroom.